Internal Components (5 of 5)
|
This was brought to you by Laser Pros International!
http://www.laserpros.com |
| REF | DESCRIPTION | |
|---|---|---|
| Rear Cover - External metal rear cover of printer | ||
| Small Rear Cover - Small metal cover that attaches with one screw to large metal rear cover of printer | ||
| Flat Cable - Ribbon cable that connects the DC controller board to the driver board - Flat drive cable 1 - Connector J1023 to J401 | ||
| Flat Cable - Ribbon cable that connects the DC controller board to the driver board - Flat drive cable 2 - Connector J1022 to J201 | ||
| Air Duct - This duct goes from fan FM1 to under the low voltage power supply | ||
| Relay PC Board - Includes ribbon cable that connects to DC controller board | ||
| Control Panel Cable - Connects control panel to low voltage power supply | ||
| Power Control Cable - Connects DC controller board to low voltage power supply | ||
| Cable Clamp - Used to attach driver board ribbon cable 1 and 2 to DC controller board | ||
| Gear Assembly - MP/tray 1 paper pickup gear assembly | ||
| PC Board Shield - Driver PC board shield - Black plastic piece that covers driver PCA | ||
| PC Board Cover - Pickup and feed driver PCA cover | ||
| Sensor Cover - Small metal cover for paper sensor located at right rear of paper pickup assembly | ||
| Paper Registration Cover - Small metal cover for paper registration sensor located at left rear of paper pickup assembly |