| REF |
PART # |
DESCRIPTION |
| 1 |
RC1-6584 |
Cam gear - 48 tooth gear associated with the cartridge for
engaging the developing rollers - Four used |
| 2 |
RC1-6589 |
41 tooth gear - Mechanically connects the four cartridge
engaging rollers - Two used |
| 3 |
RC1-6593 |
Cluster gear - 19 tooth/30 tooth gear mounted in gear assembly
on right side of printer |
| 4 |
RC1-6594 |
31 tooth gear - Gear located in the fuser drive assembly on
top |
| 5 |
RC1-6596 |
Cluster gear - 17 tooth/41 tooth gear mounted in gear assembly
on right side of printer |
| 6 |
RC1-6605 |
Aliention flag - Senses if the black or all the color cartridges
are in the proper position - Two used |
| 7 |
RC1-6668 |
Upper support cover - This is black plastic under the sheet
metal that is under the fuser |
| 8 |
RC1-6682 |
Right side cable guide - Located in the bottom right side of the
printer - Round molded part fits over a motor - Black plastic |
| 9 |
RC1-6823 |
Gear bushing - Located between the 48 tooth cam gear and the
metal chassis on the right side of printer - Four used |
| 10 |
RC1-7544 |
Upper right cable guide - Located on top of the main drive
assembly and runs vertically along the almost full length of it -
Black plastic. |
| 11 |
RC1-7545 |
Right side cable guide - Located below upper right cable
guide |
| 12 |
RC1-7576 |
Drive plate cross member - Cross member plate that attaches to
duplexer separation drive assembly on right side of printer |
| 13 |
RC1-6651 |
Shutter cover - Left side toner cartridge shutter cover - Four
used |
| 14 |
RC1-6771 |
Toner cartridge holder - Plastic support for right side of toner
cartridge - Four used |
| 15 |
RK2-0971 |
Scanner cable - Long flat scanner cable |
| 16 |
RK2-0967 |
Scanner cable - Short flat scanner cable |
| 17 |
RM1-2594 |
Scanner cable - Cable between scanner motors and DC controller
PCA |
| 18 |
RM1-2773 |
Drive motor - Print cartridge drive motor assembly |
| 19 |
RC1-7597 |
Sensing lever - This device senses when the packaging material
is removed from the toner cartridges |
| 20 |
RC1-7598 |
Tension spring - Provides tension for sensing lever on left side
of printer |
| 21 |
RM1-2627 |
E-label or memory tag cable |
| 22 |
RM1-2668 |
Fuser drive gear assembly - Includes fuser drive motor - Motor
M1 |
| 23 |
RM1-2689 |
Drive motor - Print cartridge drive motor assembly |
| 24 |
RM1-2665
RM1-2743 |
Fusing assembly 100/120VAC - Bonds toner to paper with heat
Fusing assembly - 220/240VAC - Bonds toner to paper by heat |
Now remanufacturing the HP CP5525/CP5225 Fusing Assembly 
